Download Commodity

Download Commodity

If you're dealing with saggy, droopy motorcar roof upholstery, or headliner, y'all're definitely not alone. Don't worry—this motorcar repair isn't very expensive, and better still, information technology doesn't require a lot of mechanical or engineering knowledge. While it's always best to talk to a professional upholsterer, yous may have a few at-home options at your disposal. Scroll through some frequently-asked questions and answers to get the depression-down on this type of auto repair.

  1. 1

    Glue the edges and sides back into place with a spray adhesive. If your headliner is sagging along the edge of your car ceiling, a quick bear on of glue tin do the trick. Spray the loose, peeling underside of the headliner with the adhesive, forth with the exposed section of ceiling. Await 5 minutes for the mucilage to get tacky, and and so press the material back into identify.[4]

    • Some people like to spray on ii coats of adhesive for extra security.[5]

  2. two

    Secure loose edges with double-sided tape. Stick i section of double-side record along the peeling underside of the headliner. Then, stick the tape onto your automobile's roof. This is an easy set for whatsoever peeling sections along the edges of your headliner.[6]

  3. 3

    Use pins for a quick fix. If your headliner is sagging badly, you're better off replacing information technology altogether. However, if you're in a blitz, stick a couple of pins through the drooping textile to hold it in identify.[7]

    Advertisement

  1. i

    Detach any accessories from your headliner first. Sun visors, catch handles, auto lights, and other accessories are typically attached to the elevation and upper sides of your car. Before removing the headliner and backing lath, unscrew all these attachments and fix them aside for later. Depending on your vehicle, you may need an electric drill, pliers, screwdrivers, and/or a hex tool socket kit to remove these accessories.[12]

  2. 2

    Pull downwardly the plastic pillars and sills. Detect iv plastic "pillars," or sections of plastic layered over your auto's headliner, along the front and back of your vehicle. Remove whatever plugs or screws holding these pillars in place.[13] Then, pull off any sills, or rubber strips, along the sides of your car doors.[fourteen]

    • You lot don't have to remove the pillars! The pillars only cover about one in (ii.5 cm) of the headliner material—so, you tin can shift and pull out the erstwhile headliner without detaching them completely.[15]

  3. iii

    Remove the headliner and backing board from the car entirely. Grip the headliner and bankroll board with both hands, removing them completely from the top of the car. Open up multiple motorcar doors, so it's easy to slide the backing board and headliner out.[16]

    Advertisement

  1. 1

    Peel off the old fabric. Don't try to save the former material; instead, simply remove the headliner fabric. The foam might be stuck to the backing board, which is perfectly normal.[19]

  2. two

    Remove the foam from the headliner board. Grab a bristled castor and scrub off the one-time foam. Clear away the cream completely, so the bankroll board is completely bare. Then, polish away whatever raised sections or imperfections on the backing lath with a sander.[20]

    • An air blower or air hose can help with this.

  3. 3

    Glue a new department of fabric in place. Spray downward the unabridged backing board with agglutinative glue, equally well as the underside of the new headliner material.[21] Await 5 minutes, and then the gum gets dainty and sticky.[22] Employ your hands to press and smooth the headliner over all the contours and raised sections of the backing board, and then the material looks seamless and wrinkle-free. And then, let the glue dry and cure completely.[23]

    • Bank check your mucilage tin for more specific drying and curing guidance.

    Advertisement

  1. one

    Cut out whatsoever sections of fabric where car accessories volition go. Catch a razor blade and work your way around the new headliner material. Carefully cutting around any sections where automobile accessories go, like your interior lights, grab handles, and sun visors. These sections announced slightly raised beneath the material and are easy to locate and cutting out.[24]

  2. ii

    Secure the headliner and bankroll board to the interior roof of your car. And then, reattach and secure any sills, pillars, and side accessories that you originally removed from the vehicle.[25]

  3. 3

    Clean off the new upholstery. Spray down your new headliner with a foaming spray cleaner. This keeps your new material sleek and fresh without really staining the headliner.[26]

    Advertisement

Ask a Question

200 characters left

Include your email address to become a bulletin when this question is answered.

Submit

Advertisement

  • Your upholstery should lose any imperfections one time it sits in a warm car for a few days. If you notice whatsoever major blemishes, get rid of them with an upholstery skewer.[28]

Ad

References

About This Commodity

Thanks to all authors for creating a page that has been read 11,296 times.

Did this article help you?